Conmed HelixAR Electrosurgical Generator with ABC
The ConMed HelixAR Electrosurgical Generator with Argon Beam Coagulation (#60-8800-001) is an advanced Electrosurgical Unit which is used for both open and laparoscopic procedures. This product includes only the Head Unit for Argon Beam Coagulation. Argon Gas Canisters and Foot Switches must be purchased separately.
-
All payments are Protected. Your data are secure
-
Free Worldwide Shipping for order over $300
-
30-Day Warranty and get all your money back.
Warranty: 2 Years.
It is compatible with ConMed ABC handpieces to provide argon enhanced cutting with four varying levels of hemostasis.
Features
ConMed HelixAR Electrosurgical Generator with Argon Beam Coagulation Features
- Proprietary Dynamic Response Technology is designed to minimize unintentional tissue charring.
- Rapid, superficial hemostasis reduces carbonization by allowing ABC to coagulate directly on the stoma of target tissue.
- Less blood loss, less OR time and improved eschar integrity can result from this rapid hemostasis.
- Less tissue damage due to the cooling effects of argon flow during RF energy delivery, ABC operates at lower temperatures than spray coagulation.
- Argon gas enables precise delivery of focused RF energy in a uniform stream, which is distributed evenly on tissue.
- Carries surgical smoke away from the field of view, reduces unpleasant odors and clears the surgical site of blood and other fluids.
- Program mode can store up to 100 custom surgical settings.
- Remote power control allows the surgeon to adjust power up or down from the sterile field using an electrosurgical pencil.
The HelixAR™ is intended for both open and laparoscopic procedures.
Monopolar Specialty Modes:
- Laparoscopic: Limits voltage to 2700V in Lap Mode, helping reduce the risks of inadvertent burns from capacitive coupling
- Fluids: Rapid energy initiation for immediate clinical effect in high load/low impedance conditions
- Pulse Coag: Pulsing bursts of coagulation for controlled hemostasis with reduced tissue carbonization
ABC® Modes:
- Argon Dissect: Works with the CONMED dissecting electrode to provide argon enhanced cutting with four varying levels of hemostasis
- Pulse Argon: Provides controlled hemostasis for small surface bleeders with four pulse timings
Argon Handpieces and Disposables
Bend-a-Beam® ABC® Handpieces
These high-quality disposable Argon Beam Coagulation (ABC®) handpieces for open surgery are insulated and malleable. You can bend them to 60°. They offer reduced blood loss, reduced smoke plume for better visualization, and are effective on high impedance tissue such as bone.
Triple Option Handpiece
With efficiency in mind, the Triple Option Handpiece is designed to save time and cut costs by combining three functions into one tool. It allows for use of monopolar cut, monopolar coag, and ABC® technology all in one device.
Single Function Handpiece
Delivers ABC® energy and is compatible with Dissecting Electrodes.
ABC® Dissecting Electrodes
The simple to use ABC® Dissecting Electrodes attach to a CONMED ABC® handpiece to convert Argon Beam Coagulation to Argon Beam Dissect. By forcing argon gas over an electrode in contact or non-contact mode, ABC® Dissecting Electrodes may provide reduced smoke in the surgical field. Also, less tissue damage may occur, as Argon gas flowing over the dissection may help to cool tissue at the perimeter of the intended cut.
ABC®Handpieces and Probes
CONMED ABC® Laparoscopic Probes are designed to minimize tissue damage, reduce blood loss, and produce less surgical smoke.
ABCFlex™ Argon Beam GI Probe
Gastroenterologists can use this probe with a System 7550 or 7500 ABC® ESU to achieve non-contact hemostasis with minimal thermal injury of adjacent or underlying tissue.
Specifications
ConMed HelixAR Electrosurgical Generator with Argon Beam Coagulation Specifications
- Shipping Dimensions: 38" x 30" x 6" (96.5 cm x 76.2 cm x 15.2 cm).
- Shipping Weight: 110.23 lb (50 kg).
- Power: 120 V.
Reference
No customer reviews for the moment.
